Banner
Home > news > Content

Common misunderstandings used in ion air guns

 
The ion air gun is a kind of static eliminator. It belongs to the manually-operated removable dust removal equipment, but during the use process, users are prone to the following misunderstandings when selecting and using:


Misunderstanding 1: The wind speed and air volume should be faster and larger. Generally, customers think that the faster the wind speed and the larger the air volume, the better the dust removal effect. In fact, this view is mainly a psychological factor, which is incorrect. It depends on the environment and product shape used. If it is in a clean environment, the product is very regular and flat. In fact, only a small amount of air is needed to achieve the effect. Because in this environment, the dust removal target is mainly automatic sedimentation, the external pollution source is right and wrong oily particle dust, the product surface and the airflow surface form a 30° inclination angle, and it can be formed by blowing it quietly. On the contrary, the harm caused by the large air volume and the fast flow rate changes the direction of the air flow in the clean room, and the blown air causes a large area of ​​dust pollution, and the product quality is difficult to achieve control.


Myth 2: Dust cannot be removed because the quality of the ion air gun is not good. Just now we said that the dust particles are divided into dry particles and mixed oily particle dust. The dry particle dust is very good in dust removal with the ion air gun. After the static electricity is eliminated, A small amount of wind can blow off the dust. If it is oily particle dust, blow it with an ion air gun, and the dry dust attached to the oily particles is blown away. The oily particle dust remaining on the surface of the product, it is necessary to wipe it with a clean cloth and an appropriate amount of drops. problem


Misunderstanding 3: If it is in a clean environment, the product is very regular, but in fact, only a small amount of air can be used to achieve the effect. In this environment, the object of dust removal mainly settles automatically. The external pollution source is non-oily particulate dust. The product surface and the airflow surface form a 30° inclination angle, which can be formed by blowing it quietly. On the contrary, the hazard caused by large air volume and fast flow speed is to change the air flow direction of the clean room, and the blown air forms a large area of ​​dust pollution, and the product quality is difficult to reach control. The wind speed and air volume are faster and larger. Generally, customers think that the faster the wind speed and the larger the air volume, the better the dust removal effect. In fact, this view is mainly a psychological factor, which is incorrect. It depends on the environment and product shape of the ion air gun.